Speakers: (JBL, DAS & Eminence)

  • SP4 2*15 with HF 1600watts

Two way speaker’s Technical specification:

15” Transducer Low frequency 15P:     

Normal Diameter: 380mm (15”)

Normal impedance: 8ohms

AES power capacity: 400w Program power capacity: 800w High frequency M50:

Throat Exit Diameter: 25mm (0.98”)

Normal impedance: 8ohms

AES power capacity: 50w, from 1 kHz up

Program power capacity: 100w 1 kHz up

Ø SP4 2*15 with HF 2400watts

Two way speaker’s Technical specification:

15” Transducer Low frequency Kappa:

Normal Diameter: 380mm (15”) Normal impedance: 8ohms

AES power capacity: 500w Program power capacity: 1000w High frequency M75:

Throat Exit Diameter: 38.6mm (1.52”)

Normal impedance: 8ohms

AES power capacity: 80w, from 1 kHz up

Program power capacity: 160w 1 kHz up

 

Ø SP4 2*15 with HF 2800watts

Two way speaker’s Technical specification:

15” Transducer Low frequency 15G:

Normal Diameter: 380mm (15”)

Normal impedance: 8ohms

AES power capacity: 700w Program power capacity: 1400w High frequency K8:

Throat Exit Diameter: 50mm (1.97”)

Normal impedance: 16ohms

AES power capacity: 125w, from 1 kHz up

Program power capacity: 250w 1 kHz up

Stage Monitors:

1*15 with HF 

  • 15” Transducer Low frequency: Normal Diameter: 380mm (15”)Normal impedance: 8ohms Program power capacity: 600w High frequency M3: Throat Exit Diameter: 25mm (0.98”)Normal impedance: 8ohmsAES power capacity: 50w, from 1 kHz upProgram power capacity: 100w 1 kHz up
    • 2*12 with HF

    Instrument monitors

THUM15 Powered Monitor Speakers:

Acoustic Performance:

  • Frequency Response: 39 Hz – 20 kHz (-3dB); 32 Hz – 23 kHz (-10dB)
  • Coverage: 90° H x 60° V v Maximum SPL Peak: 126dB SPL
    • High-Frequency Section:
      • Compression Driver: 1.4″ (36 mm)
      • Diaphragm Material: Titanium
      • Magnet Material: Ferrite
    • Low-Frequency Section:
      • Woofer Diameter: 15″ (381 mm)
      • Cone Material: Paper
      • Magnet Material: Ferrite
    • Power Amplifiers:
      • System Power Amplification:
        • Rated Power: 500 Watts RMS, 1000 Watts peak
      • Low Frequency Power Amplifier:
        • Rated Power: 400 Watts RMS, 800 Watts peak
        • Design: Class ‘D’
      • High Frequency Power Amplifier:
        • Rated Power: 100 Watts RMS, 200 Watts peak
        • Design: Class ‘AB’
      • Input/output:
        • Input Type: Female XLR-1/4″ Balanced
        • Input Impedance: 20 k Ohm balanced bridging; 10 k Ohms unbalanced
        • Thru: Male XLR balanced
        • Level Control: Rotating knob, 0dB at center
        • Sensitivity: +4dBu for full output (level control @ center); -36dB for full output (level control @ max)
      • Electronic Crossover:
        • Crossover Type: 24dB/octave
        • Crossover Frequency: 3 kHzFeatures:
          • 1000W (peak) Total System Power:

          v Gig-ready, high-output design v Ultra-efficient Class ‘D’ amplification

          • Class-Leading, Chest-Thumping Low End:
            • 15″ High-output woofer
            • 4″ Titanium dome compression driver
            • Dynamic bass response delivers amazing lows at all volumes
          • Total System Optimization:
            • Precision 2-way crossover
            • Transducer time alignment
            • System protection/limiting
          • Application Flexible:
            • 3-band EQ with sweep able mid to dial in the perfect sound
            • Mic/line input allows direct connection of microphone
            • Flexible mounting options including tripod and pole-mounting
            • Angled design perfect for use as a stage monitor
          • Lightweight and Portable:
            • Rugged polypropylene construction designed for heavy use
            • 2 lbs (15.1 kg)

          Specifications:

    • Equalization:
      • Low Frequency EQ: ±6dB @ 80 Hz, shelving
      • Mid Frequency EQ: ±6dB sweep able from 100 Hz to 8 kHz
      • High Frequency EQ: ±6dB @ 12 kHz, shelving
    • Power:
      • US Detachable Line Cord: 100 – 120 VAC, 50 – 60 Hz, 130W
      • AC Connector: 3-pin IEC 250 VAC, 10 A male
      • Power Supply Type: Switch mode
      • Operating Temperature: 32°F to 104°F (0°C to 40°C)
    • Safety Features:
      • Input Protection: Peak and RMS Limiting, Power Supply and Amplifier Thermal Protection
      • Display LEDs: Front/Rear Power ON, Rear OL (overload)

Full range speakers:

 Technical specification:

Normal Diameter: 305mm (12”)

Normal impedance: 8ohms

Program power capacity: 150w

Sub Woofers:

  • 1*15 W BIN (Eminence kappa Pro speakers) Technical specification:

Normal basket Diameter: 381mm (15”)

Normal impedance: 8ohms

AES power capacity: 600w

Program power capacity: 1200w

pulvinar dapibus leo.

  • 1*18 1400w (18L W1400 speakers)

Technical specification:

Normal basket Diameter: 460mm (18”)

Normal impedance: 8ohms

AES power capacity: 1400w

Program power capacity: 2400w

  • 2*18 2800w (DAS 18sx speakers) Technical specification:

Normal basket Diameter: 2* 460mm (18”)

Normal impedance: 4ohms

AES power capacity: 2000w

Program power capacity: 4000w

Line Array Speakers:

Two way Line Array speaker’s Technical specification:

Low frequency neodymium transducer:

Normal Diameter: 2*300mm (12”)

Normal impedance: 4ohms

AES power capacity: 2*700w

Program power capacity: 2*1400w

 

High frequency:

Throat Exit Diameter: 50mm (1.97”)

Normal impedance: 16ohms

AES power capacity: 125w, from 1 kHz up

Program power capacity: 250w 1 kHz up

EV Powered Monitor Speakers:

Specifications:

  • Acoustic Performance:
    • Frequency Response: 39 Hz – 20 kHz (-3dB); 32 Hz – 23 kHz (-10dB)
    • Coverage: 90° H x 60° V
    • Maximum SPL Peak: 126dB SPL
  • High-Frequency Section:
    • Compression Driver: 1.4″ (36 mm)
    • Diaphragm Material: Titanium
    • Magnet Material: Ferrite
  • Low-Frequency Section:
    • Woofer Diameter: 15″ (381 mm)
    • Cone Material: Paper
    • Magnet Material: Ferrite
  • Power Amplifiers:
    • System Power Amplification:
      • Rated Power: 500 Watts RMS, 1000 Watts peak
    • Low Frequency Power Amplifier:
      • Rated Power: 400 Watts RMS, 800 Watts peak
      • Design: Class ‘D’
    • High Frequency Power Amplifier:
      • Rated Power: 100 Watts RMS, 200 Watts peak
      • Design: Class ‘AB’
    • Input/output:
      • Input Type: Female XLR-1/4″ Balanced
      • Input Impedance: 20 k Ohm balanced bridging; 10 k Ohms unbalanced
      • Thru: Male XLR balanced
      • Level Control: Rotating knob, 0dB at center
      • Sensitivity: +4dBu for full output (level control @ center); -36dB for full output (level control @ max)
    • Electronic Crossover:
      • Crossover Type: 24dB/octave
      • Crossover Frequency: 3 kHz

 

 

  • Equalization:
    • Low Frequency EQ: ±6dB @ 80 Hz, shelving
    • Mid Frequency EQ: ±6dB sweep able from 100 Hz to 8 kHz
    • High Frequency EQ: ±6dB @ 12 kHz, shelving
  • Power:
    • US Detachable Line Cord: 100 – 120 VAC, 50 – 60 Hz, 130W
    • AC Connector: 3-pin IEC 250 VAC, 10 A male
    • Power Supply Type: Switch mode
    • Operating Temperature: 32°F to 104°F (0°C to 40°C)
  • Safety Features:
    • Input Protection: Peak and RMS Limiting, Power Supply and Amplifier Thermal Protection
    • Display LEDs: Front/Rear Power ON, Rear OL (overload)

Features:

  • 1000W (peak) Total System Power:
    • Gig-ready, high-output design
    • Ultra-efficient Class ‘D’ amplification
  • Class-Leading, Chest-Thumping Low End:
    • 15″ High-output woofer
    • 4″ Titanium dome compression driver
    • Dynamic bass response delivers amazing lows at all volumes
  • Total System Optimization:
    • Precision 2-way crossover
    • Transducer time alignment
    • System protection/limiting
  • Application Flexible:
    • 3-band EQ with sweep able mid to dial in the perfect sound
    • Mic/line input allows direct connection of microphone
    • Flexible mounting options including tripod and pole-mounting
    • Angled design perfect for use as a stage monitor
  • Lightweight and Portable:
    • Rugged polypropylene construction designed for heavy use
    • 2 lbs (15.1 kg)

HARTKE XL SERIOUS 410XL (BASS GUITAR SPEAKER):

  • Dual-Chamber, Dual-Ported Cabinet
  • Four Hartke XL 10″ Aluminum-Cone Bass Drivers
  • Power Handling: 400 Watts @ 8 Ohms
  • Frequency Response: 30 Hz To 5 kHz
  • Sensitivity: 98 dB @ 1 W/1 M
  • Voice Coil: 1.5″
  • Magnet Weight: 60 Oz.
  • Parallel 1/4″ Inputs

MARSHALL MG101FX (LEAD GUITAR)

  • Marshall MG101FX 100-watt Guitar Combo Amp with Effects and Reverb Features:
    • Output: 100 watts RMS
    • Speaker: 1 x 12″
    • Channels: Four, storable
    • Digital effects, digital reverb
    • Line in for MP3 and other music players
    • Headphone/line out with speaker emulation
    • External effects loop
    • Power amp damping
    • 2-button footswitch included
    • Weight: 44 lbs.
Enquiry

We are glad that you preferred to contact us. Please fill our short form and one of our friendly team members will contact you back.

X
Get a quote